About our Soap & Craft Molds

We offer a comprehensive selection of soap and craft molds designed for every occasion. Create beautiful, boutique type soaps to sell for profit or to give as gifts. Hundreds of designs suitable for all types of soap making including Cold Process (CP), Hot Process (HP) and Melt and Pour (MP). May also be used for chocolates.

Ounces indicated are liquid volume only. Actual weight of finished product may vary.

Mold Care

groovy_bar_141_finishedWash molds in warm soapy water. Avoid placing molds in dishwater as this can cause molds to become brittle and susceptible to cracking. Hot dish water may warp the molds.

To avoid cross-contamination, any mold used in soap making should not be reused for food/chocolates. Purchase two molds if you intend to use the mold for both food and soap making.

We suggest pouring temperatures of 135-140ºF when using soap or wax applications. If your application requires higher pouring temps consider placing the mold in a shallow cold-water bath.

Mold Tips

Molds are made from durable 4 mil clear plastic suitable for hot processed, cold processed, and melt and pour soap making when mold guidelines/pouring temperatures are followed. May also be used for wax applications and ceramic crafts.

Allowing soap to remain in the molds for 12-24 hours after cooling down will facilitate easier release. Trying to release the soap from mold immediately after cooling may present problems as the soap has not had sufficient time to shrink and set-up.

Do not use excessive force when releasing your medium. If you’re having difficulty consider placing the mold (and its contents) in the freezer. 30 to 45 minutes is sufficient freezer time for soap. Chocolates will require less than 5 minutes.

Our Commitment to U.S.A Manufacturing

Mold Market is committed to providing jobs for American workers and to supporting domestic manufacturers and suppliers. Our molds are American made and we are proud of this fact.

Mold Market molds are produced in United State factories. Many mold companies in the industry have moved production overseas to take advantage of low labor costs and generally cheaper production and material costs. We are saddened to find that some companies are advertising “Made in the USA” when this is not true. Mold Market elects to provide jobs to the U.S. workforce despite the competition from lower cost imports.

We hope that you will support us in our effort to provide high quality designer molds for discriminating consumers desiring U.S products.

Return Policy

Due to health/safety issues and the nature of our products, we cannot accept returns or exchanges. There is a 20% restocking fee should we authorize a “special consideration” return. Customer bears the cost of returning the items in salable condition.